How to Break Breakaway Screws

How to Break Breakaway Screws

We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

What Is a Breakaway Screw?

A breakaway screw is ideal for mounting kitchen or bathroom cabinet knobs and pulls, especially when the thickness of the cabinets varies. It is a long screw that has notches in it at quarter-inch intervals. It easily breaks off at the notches, so you can choose the length you need for your build.

Having recently become a do-it-yourselfer, I removed my kitchen cabinets to paint them, but when it came to putting them back, I realized the screws were in bad condition and needed to be replaced. I needed three different lengths of screws for the job. I also needed a cabinet pull for a new cabinet I was to install. At my local hardware store, while waiting for a clerk to reassure me that I was buying the right screw sizes, I discovered a package of breakaway screws. I purchased the screws and a cabinet pull.

When I opened the package for the cabinet handle, I saw that it also came with breakaway screws. However, neither package had directions on how to use them. If you've run into the same problem, you've come to the right place. This guide will explain what should be extremely obvious but isn't: how to break breakaway screws.

Tools You (Supposedly) Need

Besides the breakaway screws, of course, you need only three simple tools to break the screws.

  • Measuring tape
  • Two pairs of pliers

If you don't have these tools, don't fret. I found an alternative way to break breakaway screws, which I describe below.

How to Break Breakaway Screws

  1. Measure the object into which the screw will go to determine how deep the screw must reach. (Note: Measure not only the thickness of the cabinet or object, but also the part that will be used to fasten it.)
  2. Using this measurement, determine where you want to break the screw. It is notched at every quarter inch, so simply decide which notch to use.
  3. Use one pair of pliers to hold the side of the screw you want to use. Hold this side tightly. Use the other pair of pliers to grab the end of the part you want to remove.
  4. Wiggle the end of the screw up and down and side to side with the pliers until the piece breaks off.

Video Tutorial on How to Break Breakaway Screws

My DIY Experience With Breakaway Screws

The design of my cabinet made it difficult to use measuring tape. Instead, I simply put the screws into the holes and visually marked where the screw needed to be broken.

I had a hard time breaking the screw by myself, so I enlisted some help. We also did not have two pairs of pliers. For most of the drawers, we used a pair of pliers and a wrench. That's it, that simple.

We also added a new cabinet to the other side of the dishwasher. For this drawer, we broke the screw while it was in the drawer. We put the screws in, but not all the way, so that the part we wanted broken was close to the edge of the drawer. We didn't have it all the way to the edge, as we wanted to avoid scraping the drawer.

Doing it this way, we only needed the pliers to bend and break them. You do run the risk of ruining the cabinet if you use this method, so only use it if you are sure the cabinet is sturdy and can take this kind of pressure.

© 2013 Shasta Matova

jorge on December 09, 2015:

You can kill (or wound) the working part of the thread this way.. :) better grip the head

Shasta Matova (author) from USA on February 27, 2014:

Thanks Sheri, Tolovaj and Roberta. I think that when people are in a particular industry, they assume that everyone knows what they do, but you're right, I think this is a relatively new product, and with DIY movement, there are a lot of people who don't know these types of things even if they were common. It seems like a simple explanation on the box would be helpful.

RTalloni on February 22, 2014:

For manufacturers to assume that everyone is familiar with such a product seems a little silly, especially now that so many more people are interested in DIY projects and are willing to step out of their comfort zone to accomplish tasks. Glad you had good success in your project and were able to share what you learned here!

Tolovaj on February 03, 2014:

Sounds like a very practical solution for a lot of problems from the real world. I am not very handy, so this info is completely new to me. Thanks!

Sheri Dusseault from Chemainus. BC, Canada on January 20, 2014:

Well aren't you just the clever one. Good to know!

Shasta Matova (author) from USA on December 17, 2013:

Thanks for your vote and comment Carolyn. Glad to be of help.

Carolyn Sands from Hollywood Florida on November 27, 2013:

Nice Hub. Thanks for the info, it is good for me to know...especially since I am a widow living alone.

Voted up and useful.


Shasta Matova (author) from USA on November 26, 2013:

Thanks Dianna. I am feeling quite empowered with tackling projects I didn't think I could do before. I am learning quite a lot.

Shasta Matova (author) from USA on November 26, 2013:

Thanks Koralee. I'd be happy to put together your desk after I am done with my list of things to do. It might take a decade or two...

Shasta Matova (author) from USA on November 26, 2013:

Thanks Bill. It may seem like something intuitive to someone who is a handyman, but for me, it took me some time to figure out how to break a breakaway screw.

Dianna Mendez on November 25, 2013:

You are amazing! I have taken on many projects around the house but not with as great a challenge as this. You have my admiration on how well you solved everything and got it all back together.

Koralee Phillips from Vancouver British Columbia Canada on November 25, 2013:

Great information! I have a desk I could use your help putting together :).

Bill Holland from Olympia, WA on November 25, 2013:

This is one of those things that nobody thinks to write about but everyone wants to know. Great information here my friend.

Watch the video: Penetrating Oil Showdown Episode 2. Will Seafoam Deep Creep prevail? (July 2022).


  1. Clodoveo

    Well, yes! Don't tell fairy tales!

  2. Galan

    Sorry, topic has confused. Is distant

  3. Shaktigore

    I think I get to correct the decision.

  4. Azaryah

    Thanks for your help in this matter, now I know.

  5. Mazuzshura

    Between us speaking, I advise to you to try to look in

  6. Tojanos

Write a message